K-series bellhousing wanted

[shart]

I am still looking for a k-series to ford bellhousing and ancilliaries. Can anyone help?

[Tim Seipel]

I have a K series to Sierra 5 speed/Caterham 6 speed bell housing together with all the other bits also required to fit K to Caterham (sump assy etc)

What do you need?

 

Email or phone 0121 354 9532

 

Tim

 

 

[shart]

Basicaly I need all of the bits to put an engine onto a gearbox. The parts are required to fit a k-series into a 1971 spitfire. I can get egines and boxes easilly from scrap yards but I need the parts to put them together. From past experience I believe that the following is required: Flywheel and clutch cover, clutch plate, release bearing carrier/clutch arm, starter motor. There is probably a whole host of other bits required as well. What else do you have and what is your e-mail address?

mine is shart@chiron77.freeserve.co.uk

[Bob Corb]

Dont forget that the caterham uses its own special sump which is another £200+.

Titan motorsport do both the caterham bellhousing and another K to type nine box, this mounts at a different angle, (I've checked) There is one of these for sale new and unused at the following address.

 

http://www.racecar.co.uk/racecarparts/sale/index.html

 

It just depends whether the spitfire accepts the standard K sump which is quite deep, but will probably give less oil handling problems seen in caterhams (knocked out big end brgs)

 

If the bellhousing isn't sold I'd be interested.

 

Cheers

 

Bob