DaveK Posted December 1, 2000 Share Posted December 1, 2000 I have finally run out of room in my garage and my wifes patience has run out with parts in her spare bedroom so i have the following parts for sale front cycle wings -new rear wings - new cockpit brace - new quaife pro gearkit - race ratios tilton 7 1/4" race clutch pipercross px600 air filter 7" diff with lsd - 3.62 ratio alloy dry sump tank caterham race seat - new but has been fitted 13/16" uprated master cylinder mbe 912v3 ecu to suit carb vauxhall 16v vauxhall 16v starter motor please ring me on 07947 816175 for more details cheers dave Link to comment Share on other sites More sharing options...
peter2704 Posted December 2, 2000 Share Posted December 2, 2000 could you give more info on the MBE unit is it 3D,mines a standard vauxhall 2.0l on 45's,will it suit my engine and is it static or dizzy type and any other info , and a price? peter Link to comment Share on other sites More sharing options...
Swiss_Tony Posted December 2, 2000 Share Posted December 2, 2000 Could you give me more info on mbe system (if wacker is not interested). How much for the lsd? Thanks in advance James Link to comment Share on other sites More sharing options...
dba11 Posted December 2, 2000 Share Posted December 2, 2000 What colour are the wings (cycle and rear)? Cheers Link to comment Share on other sites More sharing options...
DaveK Posted December 2, 2000 Author Share Posted December 2, 2000 Hi answers as follows Wings are all clear - 100 the set Diff is 125.00 mbe ecu is early type that uses a pre-programmed chip.at present it has chip for a standard vauxhall on carbs.it will run distributorless with a coil pack and can run a throttle pot for 3d mapping. i can supply a basic loom if nescessary. cost 175.00 cheer dave Link to comment Share on other sites More sharing options...
dba11 Posted December 2, 2000 Share Posted December 2, 2000 I'll take the wings off your hands Dave. I have sent you en email offline. Cheers Daren. Link to comment Share on other sites More sharing options...
Rob Morris Posted December 3, 2000 Share Posted December 3, 2000 How much for the master cylinder and is this the "uprated" item? Link to comment Share on other sites More sharing options...
Rob Morris Posted December 3, 2000 Share Posted December 3, 2000 If the master cylinder is the uprated item then perhaps you could phone me with price (01952)501467. Last year I uprated my brakes and feel that the master cylinder should o been improved. Link to comment Share on other sites More sharing options...
Swiss_Tony Posted December 3, 2000 Share Posted December 3, 2000 Dave What area are you in? James cool.gif Link to comment Share on other sites More sharing options...
Graeme Posted December 4, 2000 Share Posted December 4, 2000 Is this air filter to cover twin carbs? If so how much are you asking for it? Cheers, Graeme. _________________________________ www.fluke-motorsport.co.uk Link to comment Share on other sites More sharing options...
StewartG Posted December 4, 2000 Share Posted December 4, 2000 The cheque's on its way for the seat Link to comment Share on other sites More sharing options...
I reply to every thread Posted December 4, 2000 Share Posted December 4, 2000 Have you still got the starter? Cheers Matthew Link to comment Share on other sites More sharing options...
Steve Day Posted December 4, 2000 Share Posted December 4, 2000 Hi Dave Interestingly my wife has run out of patience with my parts in any of our bedrooms but there you are... seriously, do you still have the rear wings available? if so, how much? STEVE m: 07836 384473 or email reply Link to comment Share on other sites More sharing options...
Petrolhead Posted December 5, 2000 Share Posted December 5, 2000 Is the LSD still for Sale? I assume it's for a dedion? Link to comment Share on other sites More sharing options...
DaveK Posted December 5, 2000 Author Share Posted December 5, 2000 Hi folks Matthew - yes starter motor is still for sale graeme - yes air filter will cover both carbs cms239 - lsd is complete diff unit for de dion,it has flange type output not standard push in joints,it is easy enough to change the joints and makes diff removal far easier cost 125.00 cheers dave Link to comment Share on other sites More sharing options...
Petrolhead Posted December 6, 2000 Share Posted December 6, 2000 Hi dave I am interested in the diff. Can we talk over the phone to discuss further. E Mail me your phone number and I will contact you this week. peter@pellis.co.uk Thanks Peter Link to comment Share on other sites More sharing options...
Graeme Posted December 7, 2000 Share Posted December 7, 2000 Dave, I tried to send you an email regarding the air filter, could you contact me (graeme.finlayson@vicorp.com or 07747-60-60-60eves)? Cheers, Graeme. _________________________________ www.fluke-motorsport.co.uk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now