Roller barrel throttle body setup k R300

[Bottrill]

Evening all,

I have spent a few evenings reading old posts/threads about the setup of the RBTB on the k R300. Many of these posts refer to a page on the minister power website and also one or two reference a Caterham manual. The issue is many of these posts were back from 2012 to as early as 2004 when the cars were pretty new with many of the links now expired with the minister power website no longer available from what I can see.

Can any members offer a setup advice (the TPS + voltage, idle etc) or link to either of these references?

Thanks

Lee.

[Markiebabes]

HI Lee where you based ?

Does this thread help ? 

http://www.lotus7.club/forum/static-set-caterham-titan-roller-barrels

​Mine are set 0.45ohms @ idle R400 K 

Idle around 950-1000rpm 

Draw closest to 4.5-5.0 on each trumpet pairs 

HTH 

Mark

 

[Markiebabes]

Just found this  

 

http://www.bikerhouse.com/testsite/minister2011/support/roller_barrel_setup_k-seriesr.php

[Bottrill]

Spot on, that's what I was after. Much appreciated.

Lee

[Markiebabes]

You're welcome