- K-Series engine bits ....

[SLR No.77]

I'm in need of some small items to progress an engine build ...

• Distributor base plate - the plastic piece that sits beneath the dizzy cap to which the dizzy cap is then screwed.

• Injector retaining clips - the square ones that hold the injectors to the fuel rail, but there's two types, the more common shallow ones and a deeper version, it's 4 of the deeper version that I need.

• Cam cover blanking caps for blanking off the cam cover vents when converting to dry sump ... one small, two large.

• The 10 screws that locate the baffle plate in the dry sump pan - these don't appear to be available from Caterham so any guidance on a suitable alternative would be greatly appreciated! 

Can anyone help?

Stu.

[TomB]

What you upto? 

[phil 01]

Hello Stuart, welcome!!!

[naddy]

Tom, I think he's tinkering 

 

Stu, I think I have some silicone caps that I put on the cam cover vents when I did mine. I didn't think there were three though? I'll check in the garage at some point...

[21jigsaw]

Hi Stu,

Cut off the vent pipes and welded the holes. If you want the screw specs drop me a PM.

Dave