Jump to content
Click here if you are having website access problems ×

Battery Master Switch on a 2014 RS175 Duratec


Recommended Posts

I am just about to start installing a BMS partly to prevent battery drain and partly to give myself something to do over Christmas.

I read the instructions in the How to Guide on this website.  I have come unstuck fairly early on in the instructions and just wanted to check my thinking.

Note 4 says to remove the two brown wires from the battery and connect the new brown wire etc..  However I do not have two brown wires connected to the battery, they are both connected to the solenoid.   Picture Here

With the brown cables already being remote from the battery would it suffice to just disconnect the battery end of the battery to solenoid red cable and connect the battery end to one side of the BMS switch.

I so hope that makes sense.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...