Jump to content
Click here if you are having website access problems ×

Mounting Tillet seats

7 wonders of the world

Recommended Posts

When it was still mounted my passenger seat sat on two strips of 4mm(h) x 35mm(w) aluminium that appeared to be bonded to the lowered floor, the bolts passed through the strip and the floor no deformation even after squeezing a 100kg passenger in and taking him round the track. Not directly to the floor though.

Link to comment
Share on other sites

Thanks Albert, that's the sort of thing I was thinking off as I know the lowered floors are a thicker gauge sheet but you cant really use the normal U section channel under the car as you'd rip it off.

I'll get some strip form my local engineering place, might even go wider than the 35mm and I'll order a pack of Tillet spacers to set the seat angle too.




Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...