David Lynch Posted April 20, 2015 Share Posted April 20, 2015 Anyone made brackets to at least pick up the rear seat (or runner) mounting bolts.U channel reinforcement under floor is cracked, and floor has cracked towards centre tunnel but expect it will now tear right across.Options are 1. flat patch and new channel section underneath, 2. new flat floor panel else 3. lowered floor.In all cases taking some of that load off the floor has to be a good thing. Link to comment Share on other sites More sharing options...
Drumster Posted April 20, 2015 Share Posted April 20, 2015 Hi David,Have a look at this thread http://www.lotus7.club/forum/techtalk/mot-fail-split-lowered-floor and my post #25 Link to comment Share on other sites More sharing options...
David Lynch Posted April 21, 2015 Author Share Posted April 21, 2015 Ta Chris, my search didn't point to that :) Link to comment Share on other sites More sharing options...
David Lynch Posted April 21, 2015 Author Share Posted April 21, 2015 That is exactly what I want to do but for also fitting lowered floor pan. Will likely also fix the seats on the box section rather than runners as they are neither use nor ornament once gunked up.What was the steel strip thickness you used Chris ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now