Pendennis Posted January 19, 2014 Share Posted January 19, 2014 Hi I am in need of a full set of Mike Barnby nuts and washers, please Ian 07770666356 durabang@sky.com Link to comment Share on other sites More sharing options...
Jason Plato Posted January 19, 2014 Share Posted January 19, 2014 bought mine at a local fastener suppliers , high tensile . about £7 as I recall Link to comment Share on other sites More sharing options...
Pendennis Posted January 19, 2014 Author Share Posted January 19, 2014 Cheers Dave. I have been looking around, seem to remember the Revolution wheel uses same nut, there are many types about but the sleeves vary in length. Caterham no longer do the SS version. I have the longer studs does anyone know if that causes a problem? Link to comment Share on other sites More sharing options...
Jason Plato Posted January 19, 2014 Share Posted January 19, 2014 sorry I thought you were referring to the rim nuts - as in the nuts and bolts that hold the 2 split rims together .. ... Link to comment Share on other sites More sharing options...
Jon Stewart Posted January 20, 2014 Share Posted January 20, 2014 You might find the longer studs bottom out on the nuts. I had mine drilled out which resolved the issue. Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 20, 2014 Share Posted January 20, 2014 Ian Mike Barnby has them made and I bought my last set from him. I also agree with Jon that the nuts could bottom out on the studs. Link to comment Share on other sites More sharing options...
Pendennis Posted January 20, 2014 Author Share Posted January 20, 2014 Cheers chaps, as I suspected. Mark , don't suppose you want your CWP back do you 😬 Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 20, 2014 Share Posted January 20, 2014 Ian Sorry it would limit the top speed of the Busa Link to comment Share on other sites More sharing options...
Pendennis Posted January 20, 2014 Author Share Posted January 20, 2014 Ordered a set from Rally Design £21.60 plus carriage, not bad. Drilling bottom out is a bit dramatic, better to get thicker washers machined up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now