Ian Mackenzie Posted January 12, 2014 Share Posted January 12, 2014 Hi there I'll soon be puting a Duratec in my car (currently K-series). To start with it will be a standard 2.0l with Caterham R300 exhaust and plenum inlet (but may go to throttle bodies soon!!). Does anyone have a base map that I could use to get me started? I'm also looking at fuel pumps, not sure the K-Series pump will have enough capacity, advice welcomed here. Thanks Ian Link to comment Share on other sites More sharing options...
7 wonders of the world Posted January 12, 2014 Share Posted January 12, 2014 The stock K seiries pump is good to 230bhp over that you ideally need the R500/Tomcat pump. You need to see what fuel pressure the map you get set to run at and adjust yours accordingly too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now