Coolant 32mm T-Piece

[Midas]

Right - time to admit defeat! ☹️

 

I've bought all the bits to install a PRT, but cannot find anyone who can supply a 32mm T-Piece to fit into the top hose. - part number PFK000030

 

All the LAND ROVER and MGF specialists say its no longer available from them, and E Bay has been a fruitless search. The only ones seem to be from garden pond manufacturers and they won't stand the temperatures.

 

I bought this one from caterham on a recommendation - but its too small in ODCSR Tee Piece

 

Anyone got one where I can get one - or is it time to hit the scrappers???

 

 

[Midas]

CSR T-Piece

 

Try again with link!!!

[John W]

Just a thought but can you use an end feed copper tee fitting?

[Ged]

LMA motorsport do a 32mm gauge adapter similar to this one here

 

Sorry just realised you need a three way tee rather than a bleed tee

 

Edited by - Ged on 26 Feb 2011 12:01:28

[SJD]

Would something like this work here.

[jackb_ms]

If you can imagine what is a 90 T piece, I have one of those...

 

If you Galaxy is not far from Oxford or Uxbridge you are welcome to have a look at it or I have some alu tube which you could make a piece piece of.

 

Jack

[CageyH]

I bought one ofThese

[skydragon]

Ditto, i bought the same ally T-piece when i did my install.

[Midas]

Thanks everyone - alloy T-Piece ordered off Ebay - just proves my searching skills need honing - searched ebay but didn't come across this listing

 

Thanks

 

Richard