Compomotives, glue for wings, draught reducer

[jakeandlizzy]

I have two sets of compomotives already, one black and one grey, but I would like another set with standard front widths and either 7" or 8" rear wheels for slicks. Alternatively, I could just use two rear wheels of that width (in black or grey).

 

Glue for wings: silkaflex or whatever you have that is strong to bond fasteners to the inside of the wings (I will be using teflon (plastic) zip fasteners instead of bigheads I decided). Anyone have some left in a tube collecting dust?

 

Finally, the long shot, SBFS draught reduce for tillets!

 

Thank you very much in advance as always!

[Stationary M25 Traveller]

The adhesive sold for BigHead fasteners was a 2-part acrylic adhesive I recall. Looked like Araldite. Need something like this to encapsulate fasteners, rather than SikaFlex.