Markiebabes Posted August 11, 2010 Posted August 11, 2010 Going to fit this next week but not sure what fixing points to use ? Looked on archives but not pics of actual mountings ☹️ Either rear old seat brackets,I have tillets (do I have to drill floor and strengthen ?) or use lap belt fixing points( but not really a six point harness doing it this route ? ) Any pics would be great 😬 TIA Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
Drumster Posted August 11, 2010 Posted August 11, 2010 MB, I have Tilletts and use the old seat mounting brackets at the bottom of the rear bulkhead for my crotch strap. And yes I have drilled through the floor and spaced the gap between the underside of the bracket the floor with washers. The reason for this on mine is that I have had brackets made to support the seats and it is impossible to get the nut on the bolt unless from underside the car. Sorry no pics though and a carp explanation 😳 Chris Alston C7CAT 1800 Supersprint R248 ....and then I jumped in
Markiebabes Posted August 11, 2010 Author Posted August 11, 2010 Hi Chris Thanks, not a carp explanation 😬 logical is what I thought 😬 Sounds quite straightforward ? easier with seat out I suppose ? Did you put a strengthening support on aswell ( similar to the seat support channel under car ) Cheers Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here Edited by - markiebabes on 11 Aug 2010 20:16:54
alan c Posted August 11, 2010 Posted August 11, 2010 Mark I used the rear seat mounts as well, you can have a look next Penn meet if you want. Alan
Markiebabes Posted August 11, 2010 Author Posted August 11, 2010 Alan that would be great just want to see how the fixings secure 😬 Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
LawrenceR Posted August 11, 2010 Posted August 11, 2010 Hi Mark, I am glad you picked it up with no problems. Please let me know how you find it when fitted. Thumbs Edited by - Thumbs on 11 Aug 2010 21:37:01
Markiebabes Posted August 11, 2010 Author Posted August 11, 2010 Lawrence thanks will do 😬 Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
Drumster Posted August 11, 2010 Posted August 11, 2010 MB, When I rebuilt my Caterham 2 years ago the floors were seriously bowed and the U-channels underneath had bowed as well. Floors were 15 years old and although the rivets were all in place the holes had seriously stretched. I had someone make up some supports for the seats (see here about 3/4 down the page on the left) so now the seat rests on these supports and not the floor. However the Tillett is fixed from underneath so I drilled through the support and the floor. IYSWIM Best with seat out. Chris Alston C7CAT 1800 Supersprint R248 ....and then I jumped in
Markiebabes Posted August 11, 2010 Author Posted August 11, 2010 Cheers Chris will have a proper look next week 😬 your idea of the supports for the seat base looks ideal Thanks again for the info Ps Good luck with your engine change 😬 Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
Roger Ford Posted August 11, 2010 Posted August 11, 2010 Rear seat mounts? I though those were crotch strap mounting points...
Drumster Posted August 12, 2010 Posted August 12, 2010 I'm fairly certain that on many older cars, early 90s, that the seat did not bolt directly to the floor as they now do. Caterham supplied a seat mount which was supported by the rear lugs and the front cross member . Maybe, with the advent of crotch straps the rear seat mounts have simply remained and morphed into a different usage? Chris Alston C7CAT 1800 Supersprint R248 ....and then I jumped in
Markiebabes Posted August 12, 2010 Author Posted August 12, 2010 Roger This is my point some say they are mounting points, some say not Chris I think you may be right Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
Racing Snake Posted August 12, 2010 Posted August 12, 2010 Read the BLUE BOOK i gave to you Then mount in the same place as mine 😶🌫️ Mad Hatter Racing - Feel The Duralight R Torque 😬 Carl @ Penn 7's Caution - May Contain Nuts !
Markiebabes Posted August 12, 2010 Author Posted August 12, 2010 😬 😶🌫️ I stand corrected 😶🌫️ I was going to but just wanted to see pics of installs 😬 Mark Penn7's area Stuff R400 pure fun ( more so with Aero fitted ) Webshots here
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now