X/flow pushrods

[Drumster]

If I go down the route of rebuilding my x/flow (even to sell it as a running engine) I'm going to need some push rods at the very least. Apparently Burtons don't have any!

 

Don't suppose anyone has got any kicking around?

 

Chris Alston

C7CAT 1800 Supersprint

R248 ....and then I jumped in

[Drumster]

Don't worry about the push rods. It' a little bit more serious than that ☹️

 

Chris Alston

C7CAT 1800 Supersprint

R248 ....and then I jumped in

[DaveMorris]

If you don't go down the route of re-building your crossflow - I would be interested in your "spare" pushrods

[Drumster]

Noted

 

Chris Alston

C7CAT 1800 Supersprint

R248 ....and then I jumped in

[Dave H]

Hi Chris,

 

I have a selection of old Xflow bits, which should include the pushrods. They are somewhere in the dark recesses of the garage. I'll try and look them out tonight.

When do you need them by?

 

Dave H

[Drumster]

Dave,

 

Thanks for the offer, but I'm pretty much sure I'll be going Zetec and splitting my x/flow for bits

 

Chris Alston

C7CAT 1800 Supersprint

R248 ....and then I jumped in

[Dave H]

Chris,

No worries - they can stay stored in the dark recesses of the garage until some other poor Xflow user needs them.

 

Going Zetec was the best upgrade I ever made to the Seven

 

Dave H