Trevor Phillips Posted July 15, 2002 Share Posted July 15, 2002 Are there any lining up issues that I need to know about when fitting to a VE? Link to comment Share on other sites More sharing options...
NickD Posted July 15, 2002 Share Posted July 15, 2002 Only that lining up the splines on the 2 plates is difficult unless you have a spare gearbox input shaft available. If you have a Caterham dry sump bellhousing then the depth of the bellhousing limits the options on the type of cover that you can fit Link to comment Share on other sites More sharing options...
captain chaos Posted July 15, 2002 Share Posted July 15, 2002 just out of interest...is it a lug or ring type? Link to comment Share on other sites More sharing options...
gee_fin Posted July 16, 2002 Share Posted July 16, 2002 Check the spacing between the clutch face and the release bearing/release arm hasn't changed. If running a hydraulic clutch you may need to spacer out the mech.... Graeme. ________________________________________________________ graeme finlayson / tyre warmer / fluke motorsport gee_fin@hotmail.com / www.fluke-motorsport.co.uk Barbados Rally Carnival Experience Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now