Jump to content
Click here if you are having website access problems ×

Flexible exhaust pipe / tubing - Anygood?


Recommended Posts

Was thinking of connecting up my rear box via such a pipe.

The rear box solution I have (made up by someone else) used to have the 2.5" bore pipe running between the rear chassis rail and wheel 😳

It worked on 6" rims but was tight. I only tested it a couple of times.

I want to run the pipe under the chassis. Was thinking bendy bits at the ends but I don't think the bendy pipe will be bendy enough...


I think I will fabricate something.


Goodwood here we come - some fine day...


Add lightness, says the man with a VX :-)

My 2002/2003 racing pics


General pics (mostly of 7's and cars).



Link to comment
Share on other sites

I use this type of flexible tubing at work quite often Steve and one of the biggest problems you will face will be trying to get a tight radius if you need to. Basically you can't so if that's what you need then you must use fabricated pipe bends.



(aka Arfur Nayo)


2.3 DURATEC SV You know when you've been AMMO'd *eek* 😬

R470.69 😬

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...