Jump to content
Click here if you are having website access problems ×

VX Xe inlet gasket


k.russell

Recommended Posts

I have QED jenvey dth throttle bodies on my HPC and the gasket has started to leak coolant at the front where the water inlet is, can i put something on the gasket, instant silicone gasket for example, or do you think a new gasket is needed. i have not got the bodies of yet to look at condition of gasket but they have been on for around four years.

 

Kevin R

 

black(but sometimes orange)-ali HPC

Link to comment
Share on other sites

Depending on how long the gasket has been on, it is my experience that these nearly always 'stick' to either the TBs or the head or both and are almost impossible to remove intact. I would replace it *thumbup*. Once removed, clean both faces thoroughly (I use a razor blade to carefully remove residual gasket) before fitting the new one. I never use sealant.

 

*arrowright* *arrowright*Harry Flatters *arrowright* *arrowright* *thumbup*

AKA Steve Mell - Surrey AR (Until 30th May) and Su77on Se7ener

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...