johnpbransfield Posted November 30, 2007 Posted November 30, 2007 Have just installed some new smaller headlights from SVC.One is working fine ,on the other full and dipped are OK ,but the side light will not work.I have swapped bulbs and they both work in the OK light. Have checked and double checked and treble checked the wiring where they click into the loom and everything is in the correct sequence that is according to the build manual and the diagram I drew on disconnecting them from the old lights.The rear light on the faulty side has also stopped working,I have swapped the bulbs and have ruled them out as both bulbs work in the OK side.I then rewired up the old headlight on the faulty side ,now that side light and back light will not work. Anybody got any ideas? I am sure I am missing something very obvious but what?
j passfield Posted November 30, 2007 Posted November 30, 2007 The fuse ? does it have one for each side ?
johnpbransfield Posted November 30, 2007 Author Posted November 30, 2007 Fuse...never thought of that, but I think one would cover both sides. Will check in the morning
j passfield Posted November 30, 2007 Posted November 30, 2007 In my 02 car, working down from the top of the fuse box, nos. 2 & 3 are for left and right side/tail lights respectively
johnpbransfield Posted November 30, 2007 Author Posted November 30, 2007 Thank you J.Passfield I have just changed the fuse and now is all OK.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now