Support Team Shaun_E Posted November 13, 2007 Support Team Posted November 13, 2007 Quick question - what is the tube diameter of the Arch, single diagonal FIA bar? Yellow SL #32 - member of Drowned Rat Racing
Mark Durrant Posted November 13, 2007 Posted November 13, 2007 Shaun IIRC it is 38mm but I would check with someone else to be certain. Mark D Comp Sec
DaveMorris Posted November 13, 2007 Posted November 13, 2007 Both the hoop and the 2 rear legs are 38mm o.d. on standard FIA bar. (It gets complicated for SV's and the Caged ones though) X-flow(er) power now resting. Trying Vx for a change.
sjmmarsh Posted November 13, 2007 Posted November 13, 2007 I had one on my SV - it was 1.75" for the main hoop and 1.25" for the stays to the rear of the car. Steve
DaveMorris Posted November 14, 2007 Posted November 14, 2007 That's 44.5 and 32mm in real money then X-flow(er) power now resting. Trying Vx for a change.
EVVO Posted November 18, 2007 Posted November 18, 2007 No. In real money its 1.75" for the main hoop and 1.25" for the stays to the rear of the car. Its 44.5 and 32mm in euros or whatever the modern equivalent length is.
Support Team Shaun_E Posted November 18, 2007 Author Support Team Posted November 18, 2007 Standard FIA bar measured at 38mm. Yellow SL #32 - member of Drowned Rat Racing
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now