CageyH Posted October 20, 2007 Posted October 20, 2007 Anybody know where I can get a replacement one from? I am fitting a new dash soon, so a cheap plastic thing will do. Only dead fish go with the flow....!
CageyH Posted October 20, 2007 Author Posted October 20, 2007 What current do I need? How much passes through the switch? Only dead fish go with the flow....!
strongy Posted October 20, 2007 Posted October 20, 2007 Kev, I did this as well, I ordered a replacement from cc. I'll check in my garage when I get home, as I may have ordered 2 - 1 as a spare. Dry-sumped White Supersprint Webshots here
CageyH Posted October 20, 2007 Author Posted October 20, 2007 Ta Only dead fish go with the flow....!
mav Posted October 20, 2007 Posted October 20, 2007 Temporary fix - heat up a length of paperclip and sink it into both parts... 🙅🏻♂️ DO NOT INHALE THE SMOKE PRODUCED 🙅🏻♂️
CageyH Posted October 20, 2007 Author Posted October 20, 2007 Just done the temporary repair Also ordered a new switch from Caterham (as well as some other bits I needed). Thanks for the offer though Strongy Only dead fish go with the flow....!
strongy Posted October 20, 2007 Posted October 20, 2007 Sorry Kev Couldn't find it anyway Dry-sumped White Supersprint Webshots here
CageyH Posted October 20, 2007 Author Posted October 20, 2007 Make sure you don't break the new one then! Only dead fish go with the flow....!
strongy Posted October 20, 2007 Posted October 20, 2007 No problem. I just drive around on full beams all the time Dry-sumped White Supersprint Webshots here
CageyH Posted October 20, 2007 Author Posted October 20, 2007 I have hard wired it for dip beam.... I still have the flasher for main beam Only dead fish go with the flow....!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now