2 pin plug connection - Rover K Series

[gwiddicombe]

I'm in the middle of my build and I am connecting the engine electrics. This quote from the build manual is about a connection on the RHS of the car.

 

"Attach the black 2 pin plug adjacent to the grey 14 pin plug, to the corresponding socket on the vehicle wiring loom".

 

Now, on my car the black 2 pin plug, although large enough for 2 pins, only actually has one pin to one side of the socket (i.e., it appears that one pin is missing). It's hard to take a picture of this, but I hope this makes sense.

 

So:

1) Should there actually be two pins?

2) If there should be two pins, how do I go about fixing this? Will the car start (when I get around to that) with my current configuration? I'm not clear from the build manual what this conenctions is for.

 

G

 

 

My Caterham Build Diary available here

[Johnty Lyons]

There should only be ONE pin

😬

[gwiddicombe]

Excellent...was hoping that would be the case, but it was mentioned in the build manual.

 

Cheers.

 

G

 

My Caterham Build Diary available here

[Johnty Lyons]

No probs

It's diagnostics by the by . 😶‍🌫️