How to join the fuel line to a K-series fuelrail in a decent way?

[TopQ1967]

I like to use Goodridge fuelline but I cannot find a decent way to join the presure side of the fuelline to the rail.

 

What options do I have?

 

 

Regards,

 

 

Quirin

 

 

 

[DaveK]

You can use a mocal male/female adap (MFA2-6-5) this has a m14 female port that will screw on to the oe swivel nut on the steel line and a -6 jic male thread on the other side to allow fitment to the fuel rail.

 

If you also have the plastic return line you can use a Krontec 8mm hardline dash - fitting this fits onto the plastic line and you can run your return from the FPR in goodridgw as well

 

Dave

[TopQ1967]

Thank you Dave.

 

How do you fix the line at the input side of the fuelrail?

 

It is now a flange with rubber ring secured with two small bolts. I would like to fix a Goodridge line here as well

 

Regards

 

Quirin

 

 

 

 

[oilyhands]

The exisiting hose is just clamped to the fuel union at this point, if you go to a hydraulic hose company they could do the dame with some armoured hose..

 

Oily