Thread Size: Air Temp Sensor: K Series

[Mick Day]

Does anybody know the size of this thread?

[rj]

It's M10x1.25

 

/regin

 

Edited by - RJ on 31 Aug 2007 22:21:15

[Mick Day]

[Neil Williams]

Mick,

When I fitted the air box to my Jenvey throttle bodies I managed to get a nut to attach the inlet temp sensor from BDM fastenings in Crawley. I just took the sensor in there one lunch time, where they matched it up with a suitable nut straight away.

 

Their address is:

B D M Fastenings

Royce Rd, Crawley

West Sussex, RH10 9NX

Tel: 01293 548186

 

Regards,

Neil

[rj]

I think I took a nyloc nut and turned it down to being a half nut. I might soon make an alloy nut to shave off the odd gram being a bit of a perfectionist.

 

I have just checked the thread it's M10x1.25

 

Sorry for the incorrect information

[Mick Day]

Neil: as I work in Crawley that'll be my 1st port of call this Monday.

 

Regin: thanks for checking.