Jump to content
Click here to contact our helpful office staff ×

Recommended Posts

Posted

Depending on interest I may have a new 1800K engine freshly assembled with a 7,000 mile R300 head attached.

 

The engine will be freshly built with new crank, new rods, new pistons and new Goetze liners, liner heights set to 4 thou a, carefully ssembled with new TF160 bearings, new main bearings and thrusts, new flowed oil pump, flowed oilways, pump and bearing housing. The head is from a low mileage R300 and has been stripped, inspected and re-assembled with new stem and cam seals and the cams have been re-shimmed. The head will be fitted with a new BW750 gasket and steel dowels. The engine will have new cambelt, new manual tensioner, new verniers and belt covers with the cams correctly timed.

 

It will be priced at £2200

 

Oily

  • Area Representative
Posted

Reminds me of a short tale:-

I bumped into a fried who said "Did I see you in a smart little car?2

I replied, being modest "Well it's rather nice , if small and noisy"

The response was "Hmm, I had a wife like that!"

 

GJT Crossflow

524 returned to Arch for correction

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...