CC Dry sump pieces K

[AndyG]

I have bought a 2nd hand CC dry sump for K series. I have

Bellhousing

Tower

Sump pan with installed tray and Gold filter

Gold pump

Another wheel thingy that looks like it runs with the belt

2 Braided hoses, 2 rubber hoses

 

I have ordered a fitting instruction from CC but they say there is not a list of parts.

The parts number for CC is engaged and has been all day

 

Can anyone help,

Do i need a sump gasket, should there be a gasket between the tower and bell housing

Is there a fixing bracket/kit?

Any other bits i may need. I could then order on line.

 

the car is a superlight S3

thanks AndyG

[Andy Best]

Here is the full K Series Dry Sump part list as provided by CC

 

Line Part No. Description Quantity T Item

Line Edited Bin UOM

 

1 08454 WASHER BOTTLE BRACKET - 1 N

2 1/2BSPT BLANKING PLUG - ROVER/VX 1 N

 

3 75717 OILPIPE-D.S.PUMP TO TOWER 1 N

4 70106 OIL HOSE-D.S.TANK TO SUMP/ROV 1 N

5 70107 BOLT-B'TANKHSG/G'BOX-ROVE 4 N

 

6 73154 RAD HOSE-ROV DRY 1 N

7 73155 COOLING SUBMARINE-1 1 N

8 75668 M5X12 SOCKET CAP SCREW 6 N

9 75669 5/8 BSP FLANGE UNION 1 N

10 75675 O RING 5/8 UNION TO 1 N

11 75663 SCAVENGE OIL PUMP(GOLD)- 1 N

12 75716 HI-LINE PIPE/BRACKET ADPT 1 N

13 75680 SUMP BAFFLE D/SUMP ROVER 1 N

 

14 75722 HI-LINE SCAVENGE FILTER 1 N

 

15 75682 SLEEVE OIL SUPPLY ROVER 1 N

16 75683 SUMP PAN ROVER D/SUMP 1 N

17 75684 M5X16 SOCKET CAP SCREW 6 N

18 75685 M8X70 SOCKET CAP SCREW 1 N

19 75686 M8X80 SOCKET CAP SCREW 1 N

20 75687 O RING SUMP TO FILTER 1 N

21 75688 JUBILEE CLIP ROV DS PUMP 1 N

22 75715 POLYVEE BELT-ROVER D/SUMP 1 N

 

23 75690 DRY SUMP BELLTANK ROVER 1 N

 

24 75697 OIL PUMP BRACKET ROVER 1 N

25 75698 BOTTOM PLATE ROVER 1 N

26 75721U SWIRL TOWER/TOP PLATE ASS 1 N

27 75718 ALLOY SPACER-HI-LINE PIPE 2 N

 

29 75711 ROVER 5/8 BSP CRUSH 1 N

30 75712 D/SUMP ENG.MOUNT BRKT 1 N

31 75709 SCAVENGE HOSE-1"JUMBO-ROV 1 N

32 79002 CLUTCH STOP-QH CLUTCH 1 N

33 79003 DIP STICK COVER PLATE 1 N

34 AN/1842 CLUTCH ACTUATING FORK 1 N

35 FB 110101 BOLT-MAN STRUT/ALT.ADJ/DS PUMP 1 N

 

36 FIRDS-RACE FIT INSTRUCTIONS-ROV DRY 1 N

37 HW/1174 BOLT-M5x12 ROV/VX D/S 8 N

 

38 P1290A EXPANSION BOTTLE CAP-NO HOLE 1 N

39 WSB125 CATCH TANK-OIL 2 LITRE 1 N

40 WSH3/16 WASHER-3/16"HEAVY DUTY 10 N

 

41 WSH5/16 WASHER-5/16"HEAVY DUTY 4 N

42 WSHM12 WASHER-M12 HVY DUTY 4 N

43 71167 TEMP SENDER WATER (ALL 1 N

44 75713 M8X25 CAPHEAD SETSCREW- 2 N

 

45 75714 M8X45 CAPHEAD BOLT-ROVER 2 N

 

46 OGS8 FUEL HOSE-8MM(CARB TO 1 N

 

47 SGT8-16 HOSE CLIP- 8mm-16mm 1 N

 

48 SGT25-40 HOSE CLIP- 25mm-40mm 2 N

49 77532 OIL UNION APAPTER-5/8"X5/8"MAL 1 N

50 75697T TENSIONER-ROVER OIL PUMP 1 N

 

51 75697S SCREW-TENSIONER-ROVER DRY 2 N

 

52 BMCH10X100 BOLT-METRIC CAPHEAD/ROVER 2 N

53 SP1/8X1.1/2 SPLIT PIN-1/8"X1.1/2" 1 N

54 77532 OIL UNION ADAPTER-5/8"X5/ 1 N

55 216-5/8" DOWTY SEAL 5/8" 1 N

56 HW/1482 REDUCED DIAMETER CAPHEAD 2 N

 

57 MP/1112 1/2" CRUSH WASHER - DRY 1 N

58 6118746 FILLER PLUG DIFF & DRAIN 1 N

 

59 75664 FLANGED IDLER PULLEY R500 1 N

 

60 1300-40MM CIRCLIP-40mm R500 DRYSUMP 1 N

61 MP/1112 1/2" CRUSH WASHER - DRY 1 N

 

62 75710U 5/8X5/8 BSP FILTER UNION 1 N

 

63 75710-OR O-RING-FOR 75710U FILTER 2 N

 

 

Edited by - Andy Best on 13 Aug 2007 16:03:42

[Shaun_E]

No sump gasket required - use Loctite 574 or similar. Use the same for the tower to bell housing interface.

 

Edited to say - beaten to it by a much more comprehensive answer.

 

Yellow SL #32 - member of Drowned Rat Racing

 

 

Edited by - Shaun_E on 13 Aug 2007 16:07:56

[AndyG]

cheers guy's, look's like an evening ticking the bits off (i hope)

[Jason Plato]

if the parts are second hand then I imagine most of the list will be already fitted together ?.

 

I would advise you to get along to view another instalation and it will be easier to see what lives where

 

One thing that stood out for me on your list was the dry sump type clutch fork - this is specific to the DS and would be a buggar if you got to the point of instaling and didnt have the right one 😔

 

and also the mount for the pump > block and different specific engine mount bolts

 

Ohhhhhhh !!!

 

and a dry sump engine mount (drivers side) !!

 

Hmmmm - think the rest is Ok

 

lol

 

dave

 

 

 

 

[AndyG]

Cheers Dave,

i do have the clutch fork,

not sure about the brackets though

 

[robmar]

Andy - there should be the mount of the pump to the engine in the box of bits

 

the only bit I forgot to include as far as I can tell is the plate to block off the dip stick hole, which is on the engine you have as well

 

if you spot anything missing let me know and I will have a route around in my bits to see if it is there and send on...

 

"Another wheel thingy that looks like it runs with the belt" - this is the tensioner I think from your description and should have a micro switch attached to run a light to indicate if the dry sump belt fails

 

if you get stuck give me a shout and I will see if I have any pictures, also it was all put togther so shoud be complete and correct

 

rob

[AndyG]

Cheers Rob

Not doubting your sale , i am just trying to get my head around what is required, recieved the instructions from CC today so i will have a dry run on the garage floor.

[John Howe]

Cut the centre out of a normal sump gasket and reuse it... Far simpler than using sticky goo, which takes hours to clean off, when ever you drop the sump.

 

JH

Deliveries by Saffron, the yellow 230bhp Sausage delivery machine