TopQ1967 Posted July 27, 2007 Share Posted July 27, 2007 Hi, I am looking for the dimensions of the front dampers for a SW pushrod setup. I believe widetrack and super widetrack pushrod dim's are the same. Max in ... mm (measurement centre bollt to bolt) Max out ... mm (measurement centre bollt to bolt) I think it is 305 mm. Body diameter ... mm And perhaps info about the spring coil rate. Sounds 200 Lb/in Front 150 Lb/in rear, right? I need those for the fabrication of some dampers. Regards Quirin Edited by - TopQ1967 on 27 Jul 2007 16:12:22 Edited by - TopQ1967 on 29 Jul 2007 19:39:56 Link to comment Share on other sites More sharing options...
TopQ1967 Posted July 29, 2007 Author Share Posted July 29, 2007 *arrowup* *arrowup*BTTT I like to give my suplier the data tomorrow. Please help Regards Q. Link to comment Share on other sites More sharing options...
martinwhitcher Posted July 29, 2007 Share Posted July 29, 2007 have you tried Freestyle?? sorry i can't be more help, there are not a lot of people with this mod anyway. Martin MW 51 CAT Superlight No.171 now known as:Superlight DVA 250 Link to comment Share on other sites More sharing options...
TopQ1967 Posted July 29, 2007 Author Share Posted July 29, 2007 Martin, Yes 305mm was his data. But there has to be more. Nitron has made dampers for this setup as well for instance. Regards Quirin Link to comment Share on other sites More sharing options...
I.Mupferit Posted July 29, 2007 Share Posted July 29, 2007 Gary is quite cagey about giving out details of spring rates. I can tell you the body diameter when I measure mine tomorrow if you like although I wont know the compressed length without dismantling which, to be honest, I don't want to do at the moment. I believe Gary has some unique damper rate settings he specifies on the inboard damper system which, understandably I guess, he would be reluctant to divulge too readily. Brent 2.3 DURATEC SV Reassuringly Expensive R 417.39 😬 Link to comment Share on other sites More sharing options...
TopQ1967 Posted July 29, 2007 Author Share Posted July 29, 2007 Brent, Please let me know centre bolt to bolt (in situ ) And body lenght as well. Thank you in advance Q. Edited by - TopQ1967 on 29 Jul 2007 22:30:22 Link to comment Share on other sites More sharing options...
I.Mupferit Posted July 30, 2007 Share Posted July 30, 2007 Will do, I'll measure it tonight. Brent 2.3 DURATEC SV Reassuringly Expensive R 417.39 😬 Link to comment Share on other sites More sharing options...
I.Mupferit Posted July 30, 2007 Share Posted July 30, 2007 Quirin, Measurements of the front (inboard) dampers as installed are:- Centres bolt to bolt: 26.5cms Body length: 16cms Body diameter: 4.2cms Let me know if you need anything else measured. Brent 2.3 DURATEC SV Reassuringly Expensive R 417.39 😬 Link to comment Share on other sites More sharing options...
Gambo Posted July 31, 2007 Share Posted July 31, 2007 nitron did the first single adjustable set for mine.( so Gary told me) RED 2.0 HPC 230BHP here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now