Irrelevant Posted June 21, 2007 Share Posted June 21, 2007 As it says . . . i.e. no petty strutt holes and no holes in the front (as in roadsport cage tonneaus). Must be good condition, preferably new. Don't want tillet cut outs ideally. Proud holder of the Twisted Prop award. Link to comment Share on other sites More sharing options...
Simondann111s Posted June 21, 2007 Share Posted June 21, 2007 No such thing, unless someone has had one made specially then they won't be selling. I'm in the same position, I have a standard tonneau with tillett pockets (that I don't use) and just make it fit best I can. Only about half the poppers align but it seems to be enough. Not had any problems trailering i yet. Link to comment Share on other sites More sharing options...
Jason Plato Posted June 22, 2007 Share Posted June 22, 2007 the project must be doing well if your now at the stage of looking for tonneau and fuel ? any pics yet Adam and when is the debut ? Link to comment Share on other sites More sharing options...
Irrelevant Posted June 22, 2007 Author Share Posted June 22, 2007 Dave: Car almost done . . . only major thing left is front dampers which are being built at the moment. I'll be at Abingdon on 6th July for a shakedown trackday. Should be fine for Avon Park in July. No pickies yet... Simondann111s: You are correct . . . Caterham have confirmed there is no such tonneau. Guess I'll use an old one or maybe get one from someone other than Caterham. Link to comment Share on other sites More sharing options...
DaveK Posted June 22, 2007 Share Posted June 22, 2007 Adam I just sent you a pic of the tonneau we used to run on the vx, which was a std slr race cover, boot cover and passenger side are 1 piece Dave Link to comment Share on other sites More sharing options...
Irrelevant Posted June 25, 2007 Author Share Posted June 25, 2007 Ta Dave . . .. didn't realise from the photo it was the one piece one. This is not the one I'm after as I have an ally rear deck and don't want to put poppers in the back panel. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now