Area Representative Richard Price Posted August 3, 2006 Area Representative Posted August 3, 2006 My daughters Rover 114 has a tyre that goes flat over a few days. It's a new tyre with a new valve, but the alloy wheel showed signs of corrosion when the new tyre was fitted. I'm going to have the tyre removed so that I can clean up the wheel and repaint it. Do I need to use any special materials or techniques?
Phil Posted August 3, 2006 Posted August 3, 2006 A paint job normally does the job unless it is really bad but you will have to paint the inside of the wheel as well, tyre off. X/FLOW 1700 DD 1990 ROAD USE ONLY..SO FAR
apjenkins Posted August 4, 2006 Posted August 4, 2006 You need 'Rubber Rim Seal', I'll bring some to MIRA on Saturday, you can let me have what you haven't used back at Curb or Aintree if you'r going. @ndrew
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now