Jump to content
Click here to contact our helpful office staff ×

Recommended Posts

Posted

I have for sale 711 blocked engine with the following:

244 Cam.......3000 miles

duplex, vernier timing gear

lightened /balanced bottom end with Cosworth big end studs

Accralite pistons 83.5mm

ported,big valve unleaded cyl head

Steel rocker posts and shaft with spacers

new oil pump

Electronic dizzy with coil and control unit.

Lightened flywheel (not steel)

Wet sump pan.

When in the car with dry sump, this engine showed 143.5 bhp (rolling road)

Only removed to fit all steel engine.

Looking for £500

Dave B

Posted

blimey thats an absolute steel !

ive had a similar spec engine built by mike stewart for 1.5K

If id have seen this back in april id have bitten your hand off cos its dwad cheap for this spec and it would have saved me much aggro and wasting time

 

Has anybody seen my 1990 Red Xflow

 

 

Posted

Dave,

 

Could I have first dibs please?

 

Are you in any particular rush to get it out of your garage? I may not be able to collect for a couple of weeks.

 

Cheers,

 

Sam

Posted

Don't worry Sam, once I've disposed of the VHPD tomorrow there will be space for another engine if Dave does need it out of his garage *thumbup* *thumbup*

 

Keep off the straight and narrow *tongue* 😬

Posted

Sam

No problems to hold for a few weeks. Give me a call on 01206272317 eves/week ends to sort out.

Cheers

Dave B

Posted

*arrowup*That's a good deal Strongy *thumbup*

 

Dave Ardley. White Xflow with Clams

ars est celare artem - That's why I have the Clams 😬

Updated photos here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...