Aeroscreen and BMS

[catastrada]

I'm about to order an aeroscreen to RIF.

I would like to know how you managed the Battery Master Switch eyebrow as it shares 1 fixing point with the aeroscreen.

Do you have any picture?

[Big Brother]

Try here

 

Steve

 

 

SE7EN-UP!

The difference between ignorance and apathy? I don't know, and I couldn't care less!

 

[catastrada]

Thanks Steve, very nice picture.

Are the mirrors Spa F1 ones ?

[sjmmarsh]

Catastrada

 

There are some more pictures here.

 

It just bolts back in place. You can pack the end that is not on the aeroscreen, but I haven't bothered.

 

Steve

[Big Brother]

Not sure if they're F1's but they are definitely SPA mirrors

 

Steve

 

 

SE7EN-UP!

The difference between ignorance and apathy? I don't know, and I couldn't care less!

 

[catastrada]

Thank you SteveS

[catastrada]

After multiple tries with washers I was not happy with, I decided to cut the eyebrow.

here

[sjmmarsh]

Castrada.

 

A neat job!

 

I was also thinking ... "but it is on the wrong side" until I noticed your location. I presume you aren't intending to swap back to a full screen then?

 

Steve

[RiF]

I use a rubber grommet to space the eyebrow out. Thanks Steve for your pics

 

RiF Flying even faster in my very bright yellow 226bhp Duratec 7, with internal kevlar/carbon panels and pushrod suspension 😬 😬 😬.for pictures of 7 and carbon

[catastrada]

@ steve : The day I received my 7 I removed the full screen and I replace it with one race aeroscreen (in perspex).

 

@ RIF : I did not want the eyebrow to be in touch with the aero a all, even with a rubber. This way I find it very clean.