Adjusting Spring Platforms

[RobinW]

Is the a special tool available to adjust the adjustable spring platforms (on the CSR in may case, but I believe they are all the same)?

 

I'm sagging by about 1cm at the rear off-side

[nickdodo]

Robin,

You need a C spanner - cost about £5. I expect people like DTs will have them if you cant find one locally.

 

Nick in the (1987) 1700 X Flow...

[RobinW]

Thanks Nick.

 

Is a C spanner and adjustable device, or do I need a specific size?

 

Robin

[shn7]

Thye come in fixed or adjustable sizes. Can't help on what size you need though. May also depend on the type of collar you need to adjust. The earlier ones where castelated whilst the newer (and I'm sure this must apply to the CSR) use recesses in the collar.

 

Steve.

Not forgetting Percy the Polar Bear

[David Brown]

A good fitting philips screw driver or Alun Key carefully used does just as well.