Oil Pressure sender

[Dunsfold Dave]

 

CC have sent me a oil pressure sender with one terminal when the one I am removing has two. I have read that there are two types for a K series. I have a R400 which has always read slightly low pressure but has gotten worse recently.

 

Have I always had the wrong sender and is this why my pressure always read low?

 

If the new sender is correct with one terminal to what do I connect the other cable? The small pipe into which the sender is fitted has another sender at the opposite end with a blade connector but no cable fitted is this correct? and do I connect the second cable to this?

 

or have CC just sent the wrong sender

 

Any ideas??

 

Ps I'm no mechanic it took me 15minutes to find where the sender is.

[shn7]

Dave,

 

The std sender comes in two varieties where the thread is different. Both have a single spade connection.

 

I think in your case you need the Stack sender (two connections). Don't know if there is a way to use what you've got with the stack.

 

Suggest a call to CC parts to double check this.

 

Steve.

Not forgetting Percy the Polar Bear

[Dunsfold Dave]

Thanks Steve

 

I have spoken with them and they are sending another

 

Dave