Screws!

[paul abrahams]

I need the 3 screws / bolts that are required for a 290mm momo wheel to attach to the quick release boss.

Does anyone have any or know where I can get some - will caterham sell me some?

Thanks

 

 

[Peter T]

They are standard UNF countersunk bolts, any good hardware shop can sell them, if not Caterham keep them in stock, also Redline.

 

R500 Mango Madness

[paul abrahams]

Thanks Peter I will try them tomorrow

 

 

[Crudders]

Peter - are you sure they're UNF? When I changed to Q/R recently I used the old screws that went into captive threads in the fixed boss and dug out some nuts to match, which I'm pretty sure were M6.

 

Paul - if you can't get them from the sources Peter suggests, try googling for Namrick - they sell pretty much any nut/bolt/screw/washer you could desire.

 

Crudders

[paul abrahams]

Thanks Richard, sounds like I could use some of my moto lita fixings then?

 

 

[Crudders]

Ah, but Momo is Italian and Moto Lita is British, so the latter may well have UNF/BSF/UNC/Whitworth/BA/Brass Instrument Thread Fine/Amalgamated Cockwoggle/etc.

 

You could be right though!

 

C

[F355GTS]

Paul

 

I used M6 too, if you don't have them I can send you some, let me know if you want countersunk or button?

 

Mark

[Peter T]

As long as they are 8.8 strength or more any size should be OK.

 

R500 Mango Madness

[paul abrahams]

Thanks for all the advise guys - Mark YHM 😬

 

 

[paul abrahams]

Mark - screws received, thanks very much