transponder setting

[mikehoile]

Does anybody know how to re-set the transponder on an EU3 K series please. I seem to remember that this can be done with a series of blips in a set order but cannot find refernce to this. Would appreciate help on this one please. Mike

 

You can see under mine

[Nev]

if you mean the key fob then I think you just need to press it three or four time to re synch.

If you mean pairing the immobiliser with the ecu then I think you need a dealer/rover (ex) garage.

 

I have had to do the key fob thing when I used the spare once that had not been used for a long time, or when the battery has become flat or been diconnected.

Hope this helps

Nev

 

[mikehoile]

Thanks Nev, will try this. This is part of an ongoing problem as the car refuses to start when hot ( perfect when cold) say after filling with fuel although it will start ok after 15mins or so. The immobilisor just wont reset to run and stays in immobile mode. All fob batteries changed inc the main car battery. It's a sod...