Eccles brackets for SPA door mirrors

13 posts / 0 new
Last post
RichT
RichT's picture
Offline
Last seen: 1 hour 53 min ago
Joined: 26/04/2021
Eccles brackets for SPA door mirrors

Does anyone have a pair of 3d printed brackets to fit SPA formula door mirrors, or know where I can get them? 

DerekH
DerekH's picture
Online
Last seen: 4 min 48 sec ago
Joined: 18/11/2020

Rich,

Cad files are here; https://drive.google.com/file/d/1-N1xAZflfujHWm8XC1FcDFjQnePVB3mI/view

Get them printed here. https://3dprintdirect.co.uk

Cost about £55 last year for a pair in the carbon reinforced nylon.  Need to paint them black as they are dark gray.

Use blackened M6 Stainless steel countersunk M5 screws and nuts from Ebay.

When trying to buy SPA formula mirrors its difficult to get the convex mirrors.  Would suggest the SPA GT mirrors might be better being slightly bigger.  Below is my test fit prior fixing onto the door.

Let me know if you need anything more.

Derek

R400svn
R400svn's picture
Online
Last seen: 8 min 3 sec ago
Joined: 28/07/2020

Hi i am

in the process of sorting getting aome aluminum anodised ones ready for sale, it will include bolts and new hinge pins and complete replacement for all the hinges to match. They will look almost the same as the picture but the actual mirror mount will have countersunk bolts like the hinges. These are far nicer than the printed ones and dont have any wobble at all. They will be £120 UK posted for the set. Hinges, mounts, pins and bolts. Will add better pics once i have them sorted next week. I will only have 5 sets at the moments. 

8571 3218

Colin Heseltine
Colin Heseltine's picture
Offline
Last seen: 11 hours 13 min ago
Joined: 17/04/2014

Is there any way of downloading the zip file without having to use google drive.  I can then use other unzip apps on the file.

Thx,

Colin

Kimble
Kimble's picture
Offline
Last seen: 1 week 6 days ago
Joined: 21/06/2021

There should be a download button in the top right if you are accessing through a web browser.

Geoff Martin
Geoff Martin's picture
Offline
Last seen: 16 hours 2 min ago
Joined: 17/04/2014

Hi R400svn

Can I put my name down for a pair please. 

Kind Regards 

Geoff

alan c
Offline
Last seen: 6 hours 40 min ago
Joined: 17/04/2014

Hi 

I will go for a set of these as well, do you need anything from me to confirm?
 

Alan

toolshed
Offline
Last seen: 1 week 6 days ago
Joined: 25/01/2021

Hi

I'd also like a set if you've any left

Kind regards

Seb

T-Bone
Offline
Last seen: 1 week 5 days ago
Joined: 22/05/2019

Hi R400svn,

I'd also be interested....

Tom 

MattB
MattB's picture
Offline
Last seen: 1 hour 36 min ago
Joined: 12/06/2021

I'd like a set of the alloy mounts too if there are any going.

MattB

Colin Heseltine
Colin Heseltine's picture
Offline
Last seen: 11 hours 13 min ago
Joined: 17/04/2014

 

3D printed this out with standard filament and painted with Halfords Satin Black.  Seemed reasonably solid but still some movement.  Decided to make a reinforcing bracket to utilise the freed up holes where the standard mirror was fitted.A lot of time with files going through several iterations of bracket till got the bends in the right place.  Then made a final right and left hand side version.  Powder coated yesterday and fitted today.  Mirror is absolutely solid.  Just need to source some longer blacked countersunk screws for the hinge.  I did also make a master pattern out of gauge plate which took lots of filing.

If this holds up okay then all well and good, if not will mill from solid billet of aluminium.

Just need to solve the problem of vibrating center mirror now. Car is an SV so I think the screen vibrates a little more.

Colin