Gridgway Posted October 2, 2022 Share Posted October 2, 2022 Making great progress on the reassembly of my 95 live axle car. Basically the big job remaining is to get the engine and box back in. Then a whole host of small jobs!All the rear suspension is back together, but I am unsure about the routing of the handbrake cable if anyone can help. The assembly guide clearly shows it going down between the rear chassis bar and the front a-frame bar. I assume that's right Like this...I took loads of pics, but sadly didn't get the routing from there. At the moment It comes up through the middle of the a-frame and goes between the a-frame and the diff...Then (the most difficult one to see) it goees over the front bar of the rear basket (is that the correct term?). Link to comment Share on other sites More sharing options...
rkeywood Posted October 2, 2022 Share Posted October 2, 2022 Most ignore the odd arrangement in the build manual and put it over the A frame. It then sweeps nicely to the axle. Link to comment Share on other sites More sharing options...
Gridgway Posted October 3, 2022 Author Share Posted October 3, 2022 Thanks, that's very helpful. I'll reroute it and just make sure that it can't become entangled with the propshaft. Link to comment Share on other sites More sharing options...
john g Posted October 3, 2022 Share Posted October 3, 2022 Is this of any help, 1996 Live Axle Xflow. Link to comment Share on other sites More sharing options...
Gridgway Posted October 3, 2022 Author Share Posted October 3, 2022 Thanks, it looks much better not being routed under the front of the a-frame. Is the p-clip attached to the reinforcing plate of the axle? Link to comment Share on other sites More sharing options...
Gridgway Posted October 3, 2022 Author Share Posted October 3, 2022 as an aside, not sure if anyone has spotted the oblique picture of the "perfect garage"? 1969 911 next to a 1995 7! Link to comment Share on other sites More sharing options...
john g Posted October 4, 2022 Share Posted October 4, 2022 #5 yes attached to the plate. Link to comment Share on other sites More sharing options...
Gridgway Posted October 4, 2022 Author Share Posted October 4, 2022 Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now