Jump to content
Click here if you are having website access problems ×

Handbrake cable.


Beagler

Recommended Posts


Thanks Alan

Blackburn Lancashire.

I have the pop rivets and dont have a problem drilling them out. There is no way of removing the cable without doing it or lowering the diff I dont think.

If I did drill out pop rivets I would replace with short self tappers.

Link to comment
Share on other sites

  • Area Representative

I have never found the need to remove the plate. If you have slackened the cable right off I think you can pull the handbrake lever up to bring the pulley and cable forward. When reassembling make sure you squeeze the clevis to the pulley and put washers on the pin to keep the clevis closed. This will prevent the cable slipping off the pulley and jamming. 
Incidentally. Has the cable broken? It will be the first I have come across. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...