Roger Ford Posted April 27, 2022 Share Posted April 27, 2022 Anyone got the fuse layout for a post 2014 (i.e. TiVCT) Sigma car?It doesn't seem to be on the wiring diagram (not that that's very accurate) or in the build handbook.Yes, I know I could pull each fuse in turn and see what stops working. I'd rather not if I can avoid it, especially as a number of the systems (e.g. wipers, screen wash) aren't present on my car.Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 27, 2022 Member Share Posted April 27, 2022 I have several and will send them tonight. One layout is documented but never appeared in a Guide. Another has only ever been described in a BlatChat thread. Jonathan Link to comment Share on other sites More sharing options...
Roger Ford Posted April 27, 2022 Author Share Posted April 27, 2022 Thanks JK. Link to comment Share on other sites More sharing options...
ChrisC Posted April 27, 2022 Share Posted April 27, 2022 That's part of the reason I use LED fuses, it takes the guesswork out of the fuse setup. If the fuse is glowing it's blown. Relatively expensive in comparison to a standard fuses (about £20 per set of 18 fuses plus including postage), but the ability to stick you head under the dash and see if a fuse has blown is priceless in my book, especially at the roadside where I won't have a meter. Link to comment Share on other sites More sharing options...
Roger Ford Posted April 27, 2022 Author Share Posted April 27, 2022 It's still good to know what they all are - so that, for example, you can pull the fuel pump fuse if you want to turn the engine over to circulate oil without it starting. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now