Sourcing 2.3 Duratec ignition leads

3 posts / 0 new
Last post
wild bill
wild bill's picture
Offline
Last seen: 2 hours 40 min ago
Joined: 17/04/2014
Sourcing 2.3 Duratec ignition leads

Well i'm coming up stumped. My number1 ignition lead (plug furthest from bulkhead) has corroded and jumps off. I'll order a new set I thought. They arrived and are way too long.

The one on Caterham parts online for no 1 looks extremely short and the new duratec's use coilovers.

My car is a 2.3 duratec conversion from K series. Does anyone know of a part number? The current leads are Lucas and do not have the part number on them. I only need one lead but happy to get a set i'm just struggling to find the right ones.

Help BC

Geoff Brown
Geoff Brown's picture
Offline
Last seen: 3 days 19 hours ago
Joined: 17/04/2014

So....if your DURATEC does not have coilover ignition modules but simple push on connectors at both ends then one can DIY ignition leads.

Plenty of kit around to do this & on line tutorials.

wild bill
wild bill's picture
Offline
Last seen: 2 hours 40 min ago
Joined: 17/04/2014

OOOh a project. Hadn't thought of this. Hmmmm tempting. Will investigate