Pedal Extension Plugs to assist with heel-and-toeing

63 posts / 0 new
Last post
graearea
graearea's picture
Offline
Last seen: 1 day 43 min ago
Joined: 08/03/2022
Pedal Extension Plugs to assist with heel-and-toeing

OK, here we go.

the best way to know what size you need is to measure the gap. I personally like about 35mm and the gap in my S3 is 50mm so I have a 15.

for 20 quid + 4 quid Postage, I'll make and send you two different sizes and the 5mm end plug.

the 5mm hole is oversized so that it is tightened up against the opposite cap. they're switchable either side so there's the full range of adjustments.

the inner part is slightly elliptical as my pedal wasn't round so it has a bit of adjustment in it. you may need to do a little bit of filing to get it to fit.

I do black as standard, but for an extra £5 I can do orang, green, red and grey.

please note that these won't fit the old style pedal that looks like this. if you have one of these tell me as I have a DIFFERENT version that will fit yours!

here's a video of my feet in my S3 chassis and a 15mm plug and here's a photo of my S3 pedal box with my 15mm:

this is  a 25mm in an SV chassis

if you want a set please email me your name, address, chassis size and what colour you want, and the distance between your accelerator and brake pedals like the image above. please make sure if you have the old-style (non-circular) pedal you tell me.

I'll send them out and then pay me the cash when you're happy with the product.

more info here: https://graearea.github.io/

my email address is: 3d@johnrae.com

cheers! J

Billy.Whizz
Offline
Last seen: 10 hours 53 min ago
Joined: 17/04/2014

Any chance you can show the other colours please.

SM25T
SM25T's picture
Offline
Last seen: 10 hours 49 min ago
Joined: 17/04/2014

Colour choice .... It's a pedal in a black hole !

graearea
graearea's picture
Offline
Last seen: 1 day 43 min ago
Joined: 08/03/2022

there you go. just bear in mind the camera's white balance might have affected it but it looks about right.

R400, 3d printed stuff and self cancelling indicators

Billy.Whizz
Offline
Last seen: 10 hours 53 min ago
Joined: 17/04/2014

#3 don't know what you're talking about. Read #1 and find my answer at #4.

mph
mph's picture
Offline
Last seen: 10 hours 6 min ago
Joined: 08/06/2021

Rofl

Phillip Meyer
Phillip Meyer's picture
Offline
Last seen: 19 hours 59 min ago
Joined: 11/06/2021

Cheeky request but have you/can you upload this to thingverse or similar?

(I have no interest in selling but could print them for myself)

paul richards
Offline
Last seen: 1 day 9 hours ago
Joined: 17/04/2014

Graerea

YHM x 2

Paul Richards

LADS Joint AR  Drink

I thought 2020 was the year that was going to give me all I wanted. It turned out to be the year to make me appreciate what I've got.

graearea
graearea's picture
Offline
Last seen: 1 day 43 min ago
Joined: 08/03/2022

due to insane demand I've put my price up a bit. it still seems reasonable. I just did this for fun and didn't expect 10 people in a day to order them!

R400, 3d printed stuff and self cancelling indicators

graearea
graearea's picture
Offline
Last seen: 1 day 43 min ago
Joined: 08/03/2022

holy crap I didn't expect so many people wanting this.

following me checking it earlier, I'm not going to bother with the 20mm unless you have an SV. it's way too big. if you decide you need it, I'll post it out for free. I think the 10mm is perfect but your pedals may vary.

R400, 3d printed stuff and self cancelling indicators

R400svn
R400svn's picture
Offline
Last seen: 37 min 1 sec ago
Joined: 28/07/2020

After some tinkering last year i found 16mm to be about spot on. Nice idea  to double side them to allow for adjustment.