Is anyone looking for a set of half doors, these are the carbon effect ones made out of ABS plastic by Steve at YC Plastics, which is much safer than real carbon should you have an accident IMO. I need four additional orders for these to go into production. The price are £100 per pair + £15 shipping within the UK. Please could you email Steve directly steve@ycplastics.co.uk
Yes please.
Nick
Would these fit an SV ie. a CSR?
Dave, CSR owner
Is it "one size fits all"? I have a 420R SV (lowered floor).
I'm interested
Rick
Sorry for all the questions! One more.....fitting....how do these fit and do they come ready to fit to car or is some work needed e.g. addition of poppers? Can't tell from photos.
Email received from Steve regarding SV and fitting.....see below. Hope it helps!
These were originally made for the S3 Chassis
I don`t know if they would fit?
As far as i have been told the Series 5 is just wider so technically they should fit but i cannot be 100% sure
If you are happy on that basis yes I can supply these
There is prework required the one Brett put in the picture has been trimmed back further and shaped with a hot air gun
There are many ways to fit them I have seen people use pop studs lining them up with the original fixings.Also screwed on and even people have developed hinges for them
On race cars they tend to use cable ties or industrial velcro
Yes please but required for an SV.
David Jones
@ bluenose, could you please email Steve to place your order at steve@ycplastics.co.uk
@ dave@starcraft & Neil Bolton, I've asked if he does a SV version, I'll update once I hear back.
@ Bucko, could you please email Steve to place your order at steve@ycplastics.co.uk
@ Neil Bolton, yes they'll need some fettling to fit, especially if you wish for it fit inside the scuttle at the front. This requires you to heat the plastic and curve the front profile as these are straight when made.
I am in if its not too late. Have mailed Steve.
@ Neil Bolton, I have an S3 if you need some measurements