It's the little things (unnecessary upgrades)

A couple of hood poppers fitted to an umbrella to secure it to the screen ...

Ha! Genius! 

A few things I’ve done over the years:

• Making a dip stick from some brass rod for my DS tower.
• Drilling out the rivets and replacing with rivnuts to make a removeable scuttle.
• Replacing the horn with something that can actually make a good, loud noise.
• Cargo net pocket and tunnel bag or cockpit storage.
• Club watch so I don’t need to worry about something on the dash 
• Fire extinguisher in passenger footwell.
• Longer wheel studs 
• Race brake reservoir cap to reduce leakage from the valve. 
• Tyre foam secure to the chassis rails in the boot.
• cutting Ali honeycomb in half in the boot to male it easier to remove the boot floor.
• Wrapped the exhaust primaries.

Duplicate

TomB — replacing the horn, was that just a simple 'buy a different one and fit it' job? I have been contemplating getting rid of Noddy for something a little better.

Yes - These copy Hella horns, much louder and better sounds. I used the same brackets as the CC ones, the only gotcha is needing a wired Earth as they don’t Earth through the plastic body. 

https://www.ebay.co.uk/itm/221749970828?hash=item33a154078c:g:p8AAAOSw~o5aV4Gq

I got these horns from Demon Tweeks

It's sometimes necessary to fit another relay for aftermarket horns.

And there are many more horns in the archives:
https://www.caterhamlotus7.club/forum/techtalk/klaxton-horn
https://www.caterhamlotus7.club/forum/techtalk/air-horns-1

Jonathan

I use these

https://www.mx5parts.co.uk/stebel-nautilus-compact-horn-black-p-3356.html?utm_source=google&utm_medium=googleshopping&utm_campaign=googlebase&gclid=EAIaIQobChMI5YX1p47R-AIVSdPtCh18iQwmEAQYAiABEgJFSPD_BwE

mounted under the angled section of the drivers footwell

Loving all the horn tips! Thank you all