First trackday done. lots of things to follow up with

18 posts / 0 new
Last post
Guy Lowe
Guy Lowe's picture
Offline
Last seen: 53 min 59 sec ago
Joined: 17/04/2014

That's undoing it Tony, of all people you should know how to use an adjustable wrench  Thumb Up

Cowering in a dark corner waiting for some clever dick to come along to correct or criticise my spelling and grammar Teacher

Tony Whitley
Tony Whitley's picture
Offline
Last seen: 4 hours 42 min ago
Joined: 17/04/2014

Pedant. Obviously I happen only to have a picture of undoing it after doing it up as tight as I dare 

mph
mph's picture
Offline
Last seen: 1 hour 33 min ago
Joined: 08/06/2021

There was another thread a while ago about GoPros and sound. I've been using a Rode Smartlav on the roll bar, with a deadcat on it, and it was producing decent results. Tried it in the passenger footwell last week — clamped to the underside of the dashboard. I also disabled GoPro's Hypersmooth to stop that 'sea sickness' wobbling malarkey. Worked even better I think.

Phillip Meyer
Phillip Meyer's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 11/06/2021

I haven't tried it yet so can't confirm it works but someone recommended a foam cover for the GoPro, it's available on Amazon, very cheap.

mph
mph's picture
Offline
Last seen: 1 hour 33 min ago
Joined: 08/06/2021

One of these Phillip? I've not tried one, but would be interested in hearing the results. 

Phillip Meyer
Phillip Meyer's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 11/06/2021

Yes, that's exactly it. I don't have any track days booked but will probably do one soon and will report back.

graearea
graearea's picture
Offline
Last seen: 1 hour 17 min ago
Joined: 08/03/2022

I bought a foam cover. it's much better than without, but gets blown out above about 70. I might try it a little lower down

cadwell next :D

R400, 3d printed stuff and self cancelling indicators